Edwards-signaling 869 User Manual download pdf

Installation Instructions for Electronic Horn Signal

Appliances Catalog Series 867, 868 and 869

Description

The horns are high quality signals intended for indoor or out-

door use. It is recommended that these products be installed

in accordance with the requirements in the latest edition of

national and local electrical codes. For outdoor use, the horns

must be installed with a weatherproof backbox.

See Table 2 and Figure 1 for specifications.

Installation

WARNINGS

To reduce the risk of shock, do not connect AC or

battery power to the horn until directed in these

instructions.

To reduce the risk of shock, always disconnect all

power before handling the unit.

1. Select a mounting method as detailed in Figure 1 and

install the electrical box using suitable hardware.

NOTE: Be sure hook flange is facing outward as shown in

Figure 1.

NOTE: The designation "TOP" on boxes denotes

orientation of box after installation.

2. Attach mounting plate using two #8-32 screws provided

with the surface box or four #8-32 screws provided with

weatherproof box. The flush box uses two #8-32 screws

(not provided).

3. Bring the signaling circuit field wiring into electrical box.

Figure 1. Mounting the Horn

Table 1. Horns

Horn, Surface Mount Indoor, Gray 867-*

Horn, Surface Mount Outdoor, Gray 868-*

Horn, Flush or Panel Mount Indoor, Gray 869-*

*The horns are available in two voltages. Insert suffix as

required: N5 = 120V AC, AQ = 24V AC/DC

CHESHIRE, CT 203-699-3000 FAX 203-699-3365 (CUST. SERV.) 203-699-3078 (TECH. SERV.)

1 2 3 4

Summary of Contents

Page 1 - Installation

Installation Instructions for Electronic Horn SignalAppliances Catalog Series 867, 868 and 869DescriptionThe horns are high quality signals intended f

Page 2 - Maintenance

4. Connect the signaling circuit field wires to the terminals(Figures 2 and 3).Polarity must be observed for units operatingon 24 VDC.5. Mount horn as

Page 3

Klaxon, montage encastré à l'intérieur, gris 867-*Klaxon, montage en saillie à l'extérieur, gris 868-*Klaxon, montage à l'intérieur enc

Page 4 - Entretien

3. Tirez à l’intérieur de la boîte électrique les fils externes ducircuit de signalisation.4. Raccordez les fils du circuit de signalisation aux borne

Related models: 868 | 867 |

Comments to this Manuals

No comments

Edwards-signaling 869 User Manual

Browse online or download User Manual for Safety Edwards-signaling 869. Edwards Signaling 869 Manuel d'utilisation

Summary of Contents

Related models: 868 | 867 |

Comments to this Manuals

Related products and manuals for Safety Edwards-signaling 869