Edwards-signaling SA-232 RS-232 Interface Card User Manual download pdf

SA-232 RS-232 Interface Card Installation Sheet

EN FR

EN: Installation Sheet

Operation

The SA-232 card provides an RS-232 interface to the panel.

The card can be used for connecting a printer to the control

panel to print system events. The card can also be used for

uploading and downloading panel configuration, history, and

current status to a PC running the configuration utility.

Installation

The RS-232 card is installed on the plastic assembly and

connects to the main circuit board via a ribbon cable.

To install the RS-232 card:

1. Power down the panel and disconnect the batteries.

2. Locate the card location on the plastic assembly behind

the main circuit board and connector J3 on the main circuit

board (at the top-left of the main board).

3. Attach the card to the plastic assembly using two #6

plastite screws as shown in the diagram below.

4. Connect the ribbon cable (P/N 7140187) from the card to

connector J3 on the main circuit board as shown in the

diagram.

5. Connect field wiring. See “Wiring.”

6. Power up the panel connect the batteries.

Figure 1: SA-232 card installation

Connector J3 on

main circuit board

(top-left)

RS-232/Printer card

Ribbon cable

#6 plastite screws

Top-left of

main board

Wiring

The RS-232 card can be wired to a printer to print system

events or wired to a computer to download to the panel.

Figure 2: SA-232 wiring connections

RTS (green wire)

TXD (white wire)

RXD (red wire)

GND (black wire)

Printer wiring

Note: The printer must be enabled and configured through

programming for proper operation.

Wiring to a printer:

1. Locate the serial port on the back of the printer.

2. Connect the DB-25 end of the RS-232 cable to the serial

port on the back of the printer.

3. Connect the other end of the RS-232 cable to the

RS-232 card.

Figure 3: Printer wiring

RS-232 cable

DB-25 male

Printer

To RS-232 card

DB-25 serial port

on back of printer

LINE

FEED

FO RM

FEED

TOP

SET

SELECT AL ARM

POWER P IT CH MODE

1 2 3 4

Summary of Contents

Page 1 - EN: Installation Sheet

Page 2 - Specifications

2 / 4 P/N 3101095 • REV 03 • REB 25JAN13 Figure 4: DB-25 pin connections PIN 25PIN 1DB-25 male(front view)Pin 7: COM (black wire)Pin 20: DTR (green

Page 3 - FR: Fiche D’Installation

P/N 3101095 • REV 03 • REB 25JAN13 3 / 4 FR: Fiche D’Installation Fonctionnement La carte SA-232 dote le panneau de commande d’une interface RS-232

Page 4 - Fiche technique

4 / 4 P/N 3101095 • REV 03 • REB 25JAN13 Câblage de téléchargement en amont de l’ordinateur Câblage à un ordinateur : 1. Si votre imprimante est b

Comments to this Manuals

No comments

Edwards-signaling SA-232 RS-232 Interface Card User Manual

Browse online or download User Manual for Safety Edwards-signaling SA-232 RS-232 Interface Card. Edwards Signaling SA-232 RS-232 Interface Card Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Edwards-signaling SA-232 RS-232 Interface Card