Edwards-signaling WBR User Manual download pdf

CHESHIRE, CT 203-699-3300 FAX 203-699-3365 (CUST. SERV.) 203-699-3078 (TECH. SERV.)

OWEN SOUND, CANADA 519-376-2430 FAX 519-376-7258

Installation Instructions for AdaptaBeacon

Catalog No. WBR Wall

Mount Bracket and Catalog No. CBR Corner Mount Bracket

Description

The Edwards Wall Bracket and Corner Bracket are designed for

use with Edwards AdaptaBeacon visual signals having a base suit-

able for 1/2" (13 mm) or 3/4" (19 mm) conduit mounting.

The CBR Corner Mount Bracket may be used only with surface

installed conduit/wiring (see Figure 1). The WBR Wall Mount

Bracket may be used with surface installed conduit/wiring (see

Figure 2) or with concealed conduit/wiring (see Figure 3).

Installation

The brackets must be installed in acordance with the National

Electrical Code (NEC), Canadian Electrical Code (CEC), local

code, and the local authority having jurisdiction, and using ap-

proved connection means.

Corner Mount (Figure 1)

1. Use the corner section of the bracket as a template to mark the

positions of the four mounting screws on the mounting surface.

2. Drill the four mounting holes at the positions described in 1

(above). Drill size should be determined by the size of the

mounting anchors and mounting screws (not supplied)

selected.

3. Remove the 1/2" (13 mm) knockout from the bottom of the

bracket. For indoor applications, install a 1/2" (13 mm) set

screw connector and locknut as shown in Detail A. For outdoor

applications, use appropriate conduit hardware. A pull box

may be used to simplify installation.

4. Referring to instructions supplied with the AdaptaBeacon,

assemble bracket and secure AdaptaBeacon, routing field

ground and power wiring and making ground and power

wiring connections appropriately.

The external threaded nipple protruding from the bracket arm

is for securing the AdaptaBeacon. A ground terminal is

provided for securing ground to the bracket in back of the

bracket arm. Two 1/4-20 x 1 1/4" (32 mm) screws are provided

to mount bracket arm to the corner section.

NOTE: If the Edwards AdaptaBeacon includes a 3/4" (19 mm)

NPT conduit entrance, assemble the 3/4" - 1/2" (19 - 13

mm) reducing bushing to the external threaded nipple

protruding from the bracket.

WARNING

Do not make power connections within the bracket.

5. Turn on the power to verify that the signal operates properly.

Wall Corner

Corner

Bracket

Assembly

Mounting

Screws

See Detail A

1/2" Conduit and

Connectors (by others)

Pull Box (by others

if required)

Make Connections

in Base of

AdaptaBeacon

Gasket

Figure 1. Corner Mount Bracket Surface Wiring

Conduit

Set Screw Conduit

Connector

Bracket

Locknut

Detail A (Indoor Mounting Only)

1 2

Summary of Contents

Page 1 - Installation

Page 2 - PP46000-1268 ISSUE 3

Wall Mount - Surface Conduit/Wiring (Figure 2)1. Use the backplate as a template to mark the positions of thefour mounting screws on the mounting surf

Related models: CBR

Comments to this Manuals

No comments

Edwards-signaling WBR User Manual

Browse online or download User Manual for Safety Edwards-signaling WBR. Edwards Signaling WBR User Manual

Summary of Contents

Related models: CBR

Comments to this Manuals

Related products and manuals for Safety Edwards-signaling WBR