Edwards-signaling 435EX User Manual download pdf

Class Zones Divisions Groups

I 1 and 2 B, C and D

I 1 and 2 IIA and IIB

II 1 and 2 E, F, and G

III 1 and 2

VIBRATING BELLS

AC DC

CAT. NO.

RATED

VOLTAGE

50/60 HZ

CURRENT

(RMS) CAT. NO.

RATED

VOLTAGE CURRENT

340EX-6G5 24V AC 0.21A 435EX-6C1 6V DC 1.52A

340EX-10G5 24V AC 0.21A 435EX-6E1 12V DC 0.52A

340EX-6N5 120V AC 0.041A 435EX-10E1 12V DC 0.52A

340EX-8N5 120V AC 0.041A 435EX-6G1 24V DC 0.21A

340EX-10N5 120V AC 0.041A 435EX-8G1 24V DC 0.21A

340EX-6R5 240V AC 0.021A 435EX-10G1 24V DC 0.21A

340EX-10R5 240V AC 0.021A 435EX-6K1 48V DC 0.11A

435EX-8K1 48V DC 0.11A

435EX-6P1 125V DC 0.040A

435EX-8P1 125V DC 0.040A

435EX-6S1 250V DC 0.023A

435EX-8S1 250V DC 0.023A

SINGLE STROKE BELLS

AC DC

CAT. NO.

RATED

VOLTAGE

50/60 HZ

CURRENT

(PEAK) CAT. NO.

RATED

VOLTAGE

CURRENT

(PEAK)

332EX-6G5 24V AC 3.4A 333EX-6G1 24V DC 3.5A

332EX-10G5 24V AC 3.4A 333EX-10G1 24V DC 3.5A

332EX-6N5 120V AC 0.43A 333EX-6P1 125V DC 0.52A

332EX-10N5 120V AC 0.43A 333EX-6S1 250V DC 0.26A

332EX-6R5 240V AC 0.20A

332EX-10R5 240V AC 0.20A

NOTE: The first one or two numbers following the dash in the catalog number designate

the gong size, i.e., 340EX-6G5 is a catalog series 340EX bell with a 6" gong.

DescriptionDescription

Description

Edwards Catalog Series 332EX, 333EX, 340EX and 435EX

Adaptabel Bells are heavy duty, UL listed audible signal-

ing appliances intended for use in hazardous locations.

The 332EX and 333EX series are single stroke bells suit-

able for use in coded signaling applications such as tim-

ing, scheduling, paging, or alarm. The 340EX and 435EX

series are vibrating bells suitable for use in general sig-

naling and alarm applications. The 332EX and 340EX se-

ries are ac-powered and the 333EX and 435EX series are

dc-powered. The bells are electromechanical devices and

utilize solid state components. They are Outdoor Type 4

listed. All series of the bells are listed for installation in

the following hazardous locations:

Installation Instructions for Catalog Series 332EX, 333EX, 340EX

and 435EX Adaptabel Bells for Use in Hazardous Locations

Mechanical SpecificationsMechanical Specifications

Mechanical Specifications

Dimensions

With 6" gong ......7" (178 mm) H x 5" (127 mm) D

With 8" gong 9" (229 mm) H x 5 1/8" (130 mm) D

With 10" gong11" (279 mm) H x 5 1/4" (133 mm) D

Weight

With 6" gong .......................5 1/4 pounds (2.4 kg)

With 8" gong .............................7 pounds (3.2 kg)

With 10" gong .....................8 1/4 pounds (3.8 kg)

InstallationInstallation

Installation

The following items (not supplied) are required for instal-

lation of the bell:

•3/4" conduit to contain power supply and ground wires

•One 3/4" NPT nipple

• One conduit outlet box suitable for use in the hazardous

location

•Two fasteners up to 3/8" diameter and washers suitable

for securing bell to mounting surface.

•Two wire nuts.

The bell can be mounted to any solid surface. Install bell

as follows:

1. See Figure 1. Remove cover from conduit outlet box.

Feed the two wires from the applicable power source

Figure 1. Installation Wiring

Electrical SpecificationsElectrical Specifications

Electrical Specifications

CHESHIRE, CT 203-699-3300 CUST. SERV. FAX 203-699-3365 TECH SERV. FAX 203-699-3078

1 2

Summary of Contents

Class Zones Divisions GroupsI 1 and 2 B, C and DI 1 and 2 IIA and IIBII 1 and 2 E, F, and GIII 1 and 2VIBRATING BELLSAC DCCAT. NO.RATED VOLTAGE 50/60

Page 2 - P-047550-0585 ISSUE 6

through conduit and into outlet box. Also, feed thebell's two wire leads through nipple and into box.Secure bell, nipple, and conduit to box.2.

Related models: 340EX | 333EX | 332EX |

Comments to this Manuals

No comments

Edwards-signaling 435EX User Manual

Browse online or download User Manual for Safety Edwards-signaling 435EX. Edwards Signaling 435EX User Manual

Summary of Contents

Related models: 340EX | 333EX | 332EX |

Comments to this Manuals

Related products and manuals for Safety Edwards-signaling 435EX