Edwards-signaling 116DEXMSINH Series User Manual download pdf

Installation Instructions for 116DEXMSINH Series

AdaptaBeacon

Supervised DC Steady-On Lights for

Use in Hazardous Locations

DescriptionDescription

Description

The 116DEXMSINH AdaptaBeacon 24-28V DC steady-on sig-

naling appliances are heavy duty diode-polarized lights

intended for use in general utility signaling (non-fire

alarm) applications requiring electrical supervision of sig-

naling circuit field wiring. The rotating assembly motor

driven at approximately 60 rpm. These devices are UL and

cUL listed for use in Class I, Division 1, Group C and D,

Class I, Division 2, Group C and D, Class II, Divisions 1 and

2, Group F and G, Class II, Division 1, Group E, and Class III

Division 1 and 2 hazardous locations with operating tem-

perature codes per following chart.

They are UL and cUL Listed as Type 3R, 4X, and Marine

enclosures.

The beacons are available with pendant, bracket, ceiling,

or stanchion mounting modules. See Figure 1.

InstallationInstallation

Installation

Install this unit in accordance with the applicable require-

ments in the latest edition of the National Electrical Code

and Canadian Electrical Code.

mm) NPT threaded conduit (not supplied) to the

box. Install the unit on the conduit. Proceed to

step 2.

b. Ceiling Mount Models (Figure 3): Mount the

catalog number 116EX-C, ceiling/wall mounting

module, using appropriate hardware (not supplied)

suitable for the mounting surface. Proceed to step

c. Bracket Mount Models (Figure 4): Install the

catalog number 116EX-C ceiling/wall mounting

module using appropriate hardware (not supplied)

for the mounting surface. Install the catalog

number 116EX-B wall mounting elbow to the wall

box. Run the unit's wiring through the elbow to

the wall box. Proceed to step 2.

d. Stanchion Mount Models (Figure 5): Install the

catalog number 116EX-S, stanchion mounting

module, to the main housing. Run the unit's wires

through the 1 1/4" conduit to the appropriate

junction box. Install the unit on the conduit.

Proceed to step 2.

2. Connect field earth ground wire to ground screw or

earth ground via conduit system.

3. Wire the unit in accordance with Figure 6. See Table

2 for required supply wire temperature ratings.

4. As appropriate, install the fixture on the mounting

module.

WARNING

To reduce the risks of ignition of hazardous atmo-

spheres and shock, do not apply power to the unit

until installation has been completed and unit is

tightly assembled and secured.

1. Mount using the following applicable method.

a. Pendant Mount Models (Figure 2): Install the

catalog number 116EX-P, pendant mounting

module, to the main housing. Install explosion-

proof hanger box (not supplied). Secure 3/4" (19

5. Apply power to the unit and ensure proper function.

WARNING

To reduce the risk of ignition of hazardous atmo-

spheres and shock, keep assembly tightly closed

when circuits are energized.

Cheshire, CT 06410 203-699-3300 (Ph)

203-699-3365 (Cust. Serv. Fax)

203-699-3078 (Tech. Serv. Fax)

STANCHION

116EX-S 1 1/4" HUB

CEILING

116EX-C 3/4" HUB

PENDANT

116EX-P 3/4" HUB

116EX-C

116 SERIES HOUSING AND GLOBE

ASSEMBLY WITH GUARD

WALL

116EX-B 3/4" HUB

Figure 1. Mounting Options

1 2 3 4

Summary of Contents

Installation Instructions for 116DEXMSINH SeriesAdaptaBeacon® Supervised DC Steady-On Lights forUse in Hazardous LocationsDescriptionDescriptionDescri

Page 2 - Figure 6. Wiring Diagram

P/N 3100810 ISSUE 1Figure 2. Detail of Pendant Mounting Figure 3. Detail of Ceiling MountingFigure 4. Detail of Wall Bracket Mounting Figure 5. De

Page 3 - Maintenance

P/N 3100810 ISSUE 1MaintenanceMaintenanceMaintenanceMaintenanceMaintenanceDisassemble the unit as follows (Figure 7):counterclockwise direction. Remo

Page 4

P/N 3100810 ISSUE 1Contacting Edwards:Phone: (203) 699-3300E-Mail: [email protected]@edwards-signals.comWebsite: http://w

Comments to this Manuals

No comments

Edwards-signaling 116DEXMSINH Series User Manual

Browse online or download User Manual for Safety Edwards-signaling 116DEXMSINH Series. Edwards Signaling 116DEXMSINH Series User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Edwards-signaling 116DEXMSINH Series